A1-ZJ
Peripheral pump should be installed in enclosed places, or at least protected against inclement weather. There is no need to install a bottom valve in the pipeline, just make sure that there is a certain amount of perfusion liquid in the pump body before work.
Application Area
Peripheral pump is widely used for family living water supply, well water pumping, tap water boosting, garden irrigation, water supply for vegetable greenhouse, industrial, and etc.
Pump
Cast iron pump body
Brass impeller
AISI 304 shaft
Max. liquid temperature: +40℃
Max. suction:+8m
Moter
Motor with copper winding
Built-in thermal protector for single phase motor
Insulation class: B
Protection class: IP44
Max. ambient temperature: +40℃
Features
[Intelligent efficiency] The efficiency of the electric pump is higher than the industry standard
[Smart Start] Passed millions of automatic start-stop tests
[Smart Mute] Enjoy quality life with low noise
[Intelligent Maintenance] Four modes are automatically/manually switched at will
[Intelligent Adaptation] Intelligent recognition system pressure, no need for manual setting
[Intelligent protection] Automatic shutdown protection for locked rotor, water shortage, overload, lightning strike
Our Advantages
As our director said in an interview: We have been working hard to help regions and people to solve problems of water usage. Everyone's efforts in DAYUAN enable it to achieve a lot in different fields and regions. Our products are well adapted to a wide variety of use environments, such as agricultural irrigation and domestic water, even to water conservancy environment and other uses. In addition, we have set up sales centers in many regions around the world to provide technical support and product services.
Model Instruction
Technical Table
|
Model |
Power |
DN |
Q(m³/h) |
0 |
0.5 |
1 |
1.5 |
2 |
2.5 |
3 |
3.5 |
4 |
4.5 |
5 |
5.5 |
6 |
|
|
|
kW |
HP |
|
Q(L/min) |
0 |
8.3 |
16.7 |
25 |
33.3 |
41.7 |
50 |
58.3 |
66.7 |
75 |
83.3 |
91.7 |
100 |
|
A1-200ZW/ZJ |
0.2 |
0.27 |
1"×1" |
H(m) |
25 |
18.4 |
12 |
5.8 |
0.6 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
A1-300ZW/ZJ |
0.3 |
0.35 |
1"×1" |
|
30 |
22.2 |
15 |
8.4 |
2.3 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
A1-400ZW/ZJ |
0.4 |
0.55 |
1"×1" |
|
35 |
26.2 |
18 |
10.5 |
3.7 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
A1-600ZW/ZJ |
0.6 |
0.75 |
1"×1" |
|
42 |
33.3 |
25.3 |
18 |
11.3 |
5.3 |
1 |
/ |
/ |
/ |
/ |
/ |
/ |
|
A1-800ZW/ZJ |
0.8 |
1 |
1"×1" |
|
50 |
40.3 |
30.2 |
21.6 |
14.1 |
7.6 |
2.3 |
/ |
/ |
/ |
/ |
/ |
/ |
|
A1-1100ZW/ZJ |
1.1 |
1.5 |
1.5"×1.5" |
|
55 |
51.2 |
47.2 |
43.2 |
38.9 |
34.6 |
30 |
25.2 |
20.4 |
15.2 |
10.2 |
5.2 |
1 |
Performance Curve
Model Analysis
|
NO. |
Component |
Material |
NO. |
Componnet |
Material |
No. |
Component |
Material |
|
1 |
Inlet connector |
Cast iron |
9 |
Mechanical seal |
Ceramic-graphite |
17 |
Capacitor |
|
|
2 |
Check valve |
|
10 |
Connector |
Cast iron |
18 |
Terminal box cover |
PP |
|
3 |
Drain plug |
Iron |
11 |
Bearing |
|
19 |
Rear cover |
PP |
|
4 |
Filling plug |
Brass |
12 |
Rotor |
|
20 |
Fan |
ZL102 |
|
5 |
Pump body |
Cast iron |
13 |
Stator |
|
21 |
Fan cover |
PP |
|
6 |
Micro switch |
|
14 |
Pump base |
ZL102 |
|
|
|
|
7 |
Pressure tank |
|
15 |
Base plate |
PP |
|
|
|
|
8 |
Impeller |
Brass |
16 |
Terminal box |
PP |
|
|
